Greenhouse gas emissions data can be reported either by economic sector, which includes electric power generation as a separate sector, or by end-use sector, which distributes the emissions from electricity generation across the economic sectors where the electricity is used. The residential and commercial sectors are large consumers of electricity, so it is appropriate to address both emissions from direct sources and electricity end-use for these sectors.
Direct emissions from the residential and commercial sectors respectively account for 5.6 and 5.4 percent of total greenhouse gas emissions in the United States (see Figure 1).
Figure 1: U.S. Greenhouse Gas Emissions by Economic Sector (2010)
Source: Environmental Protection Agency (EPA), Inventory of U.S. Greenhouse Gas Emissions and Sinks: 1990-2010, Table ES-7, 2012. http://www.epa.gov/climatechange/emissions/usinventoryreport.html 
Ninety-three percent of the residential sector’s direct greenhouse gas emissions come from the combustion of fossil fuels, primarily for heating and cooking. Less than 7 percent of direct emissions come from the substitution of ozone depleting substances and other minor sources. In the commercial sector, nearly 60 percent of direct emissions come from on-site fossil fuel combustion. Other sources of direct commercial emissions include landfills, wastewater treatment, the substitution of ozone depleting substances, and other minor sources (see Figure 2).
Figure 2: Direct Emissions of Greenhouse Gases in the U.S. Commercial Sector (2010)
Source: EPA, Inventory of U.S. Greenhouse Gas Emissions and Sinks: 1990-2010, Table 2-12, 2012. http://www.epa.gov/climatechange/emissions/usinventoryreport.html 
U.S. electricity sales are split among the residential, commercial, and industrial sectors, with the residential and commercial sectors accounting for 39 and 35 percent of sales, respectively.(see Figure 3).
Figure 3: Retail Sales of Electricity to Ultimate Customers, Total by End-Use Sector(2010)
Source: U.S. Energy Information Administration (EIA), Electric Power Monthly, Table 5.1, September 2012. http://www.eia.gov/electricity/monthly/epm_table_grapher.cfm?t=epmt_5_01 
When emissions from electricity generation are attributed to end-use sectors, the residential and commercial sectors are responsible for 18 and 17 percent of total U.S. emissions, respectively (see Figure 4). Electricity-related geenhouse gas emissions account for 70 percent of total residential emissions and 67 percent of total commercial emissions.
Figure 4: Direct and Electricity-Related Greenhouse Gas Emissions by End-Use Sector (2010)
Source: EPA, Inventory of U.S. Greenhouse Gas Emissions and Sinks: 1990-2010, Table 2-14, 2012. http://epa.gov/climatechange/emissions/usinventoryreport.html 
Emissions from the residential and commercial sectors, including both direct emissions and end-use electricity consumption, can largely be traced to energy use in buildings. Diverse factors determine how much energy buildings consume; these include the size of the building, the design and materials used, and the kinds of lighting and appliances installed.
Total greenhouse gas emissions, including both direct and end-use emissions, from residential and commercial buildings in the United States accounted for about 40 percent of total U.S. carbon dioxide (CO2) emissions and 7 percent of global CO2 emissions in 2010. Greenhouse gas emissions attributable to buildings have been steadily increasing; in recent decades, emissions from the on-site combustion of fossil fuels have remained relatively steady while electricity consumption has increased (see Figure 5).
Figure 5: CO2 Emissions for U.S. Residential and Commercial Buildings
Source: DOE, 2011 Buildings Energy Data Book, Section 1.4.1, March 2012. http://buildingsdatabook.eren.doe.gov/ .
Greenhouse gas emissions from buildings have increased as building size has increased. In the residential sector, the number of homes and the size of these homes have been increasing over time. As homes grow larger, more energy is generally needed for heating, cooling, and lighting. Over time, homes also have added more appliances and consumer electronics.
Even as residential energy use has increased overall, the amount of energy used per square foot of residential buildings, a measure of energy intensity, has decreased, due to the increased efficiency of consumer appliances and recent regional building trends, such as improved residential building energy codes. (see Figure 6) Energy intensity indicators are used to compare energy use in buildings through time. These indicators are used to examine energy-use trends in the different types of buildings in the residential and commercial sectors. They show how the amount of energy used per unit of output or activity has changed over time. Using less energy per unit of output reduces energy intensity; using more energy per unit increases the energy intensity. A weather factor is used to take into account the impacts of annual weather variation on energy consumption.
Figure 6: Residential Energy Use, Energy Use Intensity, and Energy Use Factors
Source: DOE, Energy Efficiency and Renewable Energy (EERE), “Trend Data: Residential Buildings Sector ,” updated 14 May 2008. Note: The indicators on this chart are based on an Energy Use Index that is calibrated to 1985 levels.
In the commercial sector, both energy use and energy intensity have generally increased in recent decades. The general rise in energy intensity since 1985 has shown, however, a modest decline in recent years (see Figure 7). Commercial buildings have shown steady growth in size in recent years, as reflected by the increase in average floor space through time.
Figure 7: Commercial Energy Use, Energy Use Intensity, and Energy Use Factors
Source: DOE, EERE, “Trend Data: Commercial Buildings Sector ,” updated 14 May 2008. Note: The indicators on this chart are based on an Energy Use Index that is calibrated to 1985 levels.
In the residential sector, space heating and cooling accounts for 43 percent of total primary energy use. Therefore, total energy demand from this sector is fairly sensitive to weather and varies considerably by region in a single year and over time in a given location. Other significant end uses of energy in the residential sector include water heating, lighting, refrigeration, electronics, wet cleaning and cooking (see Figure 8).
Figure 8: Residential Buildings Primary Energy End Use Splits (2010)
Source: DOE, 2011 Buildings Energy Data Book, Section 2.1.5, March 2012. http://buildingsdatabook.eren.doe.gov/ .
In the commercial sector, space heating, ventilation and space cooling accounts for 43 percent of total primary energy use and lighting accounts for one-fifth. Refrigeration, water heating, electronics, computers, and cooking also use significant quantities of energy in the commercial sector (see Figure 9). The commercial sector encompasses a variety of different building types, including schools, restaurants, hotels, office buildings, banks, and stadiums. Different building types have very different energy needs and energy intensities.
Figure 9: Commercial Buildings Primary Energy End Use Splits (2010)
Source: DOE, 2011 Buildings Energy Data Book, Section 3.1.4, March 2012. http://buildingsdatabook.eren.doe.gov/ .
For more information on buildings, see Climate TechBook: Buildings Overview .
On a global scale, energy use and greenhouse gas emissions data for the residential and commercial sectors can be difficult to quantify. Globally, the quantity of energy use attributed to buildings, as a proxy for the residential and commercial sectors, varies by country and climate. Energy consumption levels and primary fuel types of buildings in a specific country depend on economic and social indicators, such as national income and level of urbanization. Some key trends observed include:
Reducing emissions from the residential and commercial sectors can be done in a variety of ways and on a number of scales:
Landfill waste can be reduced (thereby lowering the volume of decomposing material that produces methane, a powerful greenhouse gas) or harnessed as an energy source. Methane-capture systems in landfills prevent greenhouse gases from being released into the atmosphere.
Embodied energy refers to the energy used to extract, manufacture, transport, install, and dispose of building materials. Choosing low carbon materials—such as local materials, materials that sequester carbon, and products manufactured at efficient industrial facilities reduces emissions.
Building designs and construction techniques can maximize the use of natural light and ventilation, which minimizes the need for artificial light and HVAC equipment. Using building shading techniques, installing windows to minimize or maximize solar intake (depending on the region), and properly insulating against unwanted air flow between indoor and outdoor spaces improve energy use. Many other options are available and “green” builders are continually creating innovative ways to maximize efficiency in building spaces.
Using efficient appliances can minimize energy consumption and concomitant GHG emissions from electricity and direct fossil fuel combustion.
Following conservation guidelines and making personal choices to reduce the use of appliances, artificial lighting, and HVAC equipment (for example, by shutting them off when they are not in use) will reduce energy use. Also, opting for smaller residential and commercial spaces can reduce the energy needed for building construction and operation.
Our work at C2ES focuses on all types of commercial and residential building topics, including policy and low-carbon building technologies. We track state and federal building and efficiency policies, blog about building-related energy issues, and create and maintain a current online resource of building technologies.
Tracking Policy – Our state maps  provide useful overviews of state policies supporting energy-related building codes and standards, such as Commercial Building Energy Codes . We also track and analyze policy at the national level, including what is happening in Congress  and the Executive Branch .
Research – We produce research , including reports, white papers, and briefs, on climate and clean energy issues.
Climate Compass Blog – On our blog we inlclude posts related to the residential and commercial sectors. See our blog posts .
Climate Techbook – The Residential & Commercial section of the Climate Techbook provides an overview of these sectors and decriptions of technologies related to improving building energy efficiency. Below is a list of all the buildings-related Techbook factsheets.
|Residential & Commercial Overview ||Natural Gas |
|Buildings Overview ||Residential End-Use Efficiency |
|Building Envelope ||Smart Grid |
|Lighting Efficiency |
U.S. Department of Energy (DOE)
U.S. Energy Information Administration
U.S. Environmental Protection Agency (EPA)
Related Business Environmental Leadership Council (BELC) Companies
|Bank of America ||HP |
|Cummins Inc. ||IBM |
|Duke Energy ||Johnson Controls, Inc. |
|Exelon ||Toyota |
 Hydrofluorocarbons (HFCs) and perfluorocarbons (PFCs) are used as alternatives to several classes of ozone-depleting substances (ODSs) that are being phased out under the terms of the Montreal Protocol and the Clean Air Act Amendments of 1990. Ozone depleting substances—chlorofluorocarbons (CFCs), halons, carbon tetrachloride, methyl chloroform, and hydrochlorofluorocarbons (HCFCs)—are used in a variety of industrial applications including refrigeration and air conditioning equipment, solvent cleaning, foam production, sterilization, fire extinguishing, and aerosols. Although HFCs and PFCs are not harmful to the stratospheric ozone layer, they are potent greenhouse gases. Environmental Protection Agency (EPA), Inventory of U.S. Greenhouse Gas Emissions and Sinks: 1990-2010, 2012. http://www.epa.gov/climatechange/emissions/usinventoryreport.html 
 Environmental Protection Agency (EPA), Inventory of U.S. Greenhouse Gas Emissions and Sinks: 1990-2009, 2011. http://www.epa.gov/climatechange/emissions/usinventoryreport.html 
 U.S. Department of Energy (DOE). 2011 Buildings Energy Data Book. Section 1.4.1. Prepared for the DOE Office of Energy Efficiency and Renewable Energy by D&R International, 2012. http://buildingsdatabook.eren.doe.gov/ .
 One million metric ton is equal to one teragram. For reference, one million metric ton of CO2e is equal to 280,000 new cars each being driven 12,500 miles or 90 minutes of U.S. energy consumption or 1 day of U.S. energy emissions from lighting buildings, see DOE, 2010 Buildings Energy Data Book, 2011.
 DOE, Energy Efficiency Trends in Residential and Commercial Buildings, August 2010. http://apps1.eere.energy.gov/buildings/publications/pdfs/corporate/build...  U.S. Census Bureau, Housing Vacancies and Homeownership, http://www.census.gov/hhes/www/housing/hvs/historic/index.html .
 DOE 2010
 The weather factor is included to show variations in weather conditions that may have had an impact on energy use in a given year. Data that is weather-adjusted shows how the indicator would have performed under “normal” weather conditions; for example, data in years with extreme weather (such as unusually cool weather that would increase energy consumption for indoor heating) is adjusted to show performance without the influence of weather. As the figure indicates, weather conditions have remained fairly stable while other indicators have risen; this indicates that weather conditions do not have as much of an impact on energy use as other factors.
 International Energy Agency (IEA). World Energy Outlook, 2010 Edition. Paris: IEA, 2010. http://www.worldenergyoutlook.org/2010.asp.UNEP , Urban Density and Transport-related Energy Consumption, http://maps.grida.no/go/graphic/urban-density-and-transport-related-energy-consumption .
 Smith, K. R. and E. Haigler. “Co-Benefits of Climate Mitigation and Health Protection in Energy Systems: Scoping Methods.” Annual Review of Public Health 29 (2008): 11-25.